Contractor Equipments Surface Preparation Deck Scarifiers Units
Multiple Cutting Heads Tct Cutters
We offer durable accessories and spare parts for concrete
scarifiers, concrete scarifying machines,concrete planers milling
machines, floor grinders and scabblers.ranging from TCT tungsten
carbide cutters/flails,milling cutters,scabbler bits, full steel
star and beam cutters and other ODM accessories, perfectly
compatible with brands EDCO, Bartell BEF,Blastrac,SASE,Airtec,
Trelawny TFP planers, Kindex,Scanmaskin and other scarifiers and
floor planers.
To assist you fastly for right tools, pls advise below:
-concrete scarifiers/ floor planers brand and model
-drum shaft diameter
-cutter O.D*I.D and tip number
Below are the standard sheet to help you to choose the correct
tools for your scarifiers floor planers:
Scarifier type | standard accessories | qty each set | Compatible scarifiers |
6" scarifiers
150mm planers | 5pt TCT carbide flails
5 teeth milling cutters | 76pcs TCT /set 84pcs TCT/set
20-40pcs milling/set | Von Arx® - FR200 Von Arx® - VA25 - 12mm Airtec® - RT - 2000 SASE® - SC10E - 12mm MK® - SGII / SG5 / SG9 Sase® - SC8E Bartell® - SP8 Bartell®BEF 200 General Equipment® - SP8 Kut-Rite® - KR8 Blastrac BMP-215 SCARIFIER Trelawny TFP 200 RANGE |
8" scarifiers
200mm planers | 5pt TCT carbide flails
6pt TCT carbide flails 6pt TCT Flat Face flails
5 teeth milling cutters | 76pcs TCT/set 84pcs TCT/set 100pcs TCT/set
About 40pcs Milling/set |
10" scarifiers
250mm planers | 6pt TCT carbide flails
8pt TCT carbide flails 8pt TCT Flat Face flails
5 teeth milling cutters | 105pcs TCT/set
108pcs TCT/set
120pcs TCT/set About 40pcs Milling/set | Kut-Rite® - KR10 Sase® - SC10E - 9/16" Edco® - CPM-10 - 5/8" EGM 25-10 Husqvarna® - CG 200 S - 1/2" Blastrac - BMP-265 SCARIFIER Trelawny-FLOOR SCARIFIER TFP 260 Airtec - RT - 2500
Airtec - RT - 2500 Duo
Airtec - RT 3200
Airtec - RM 320 |
12" scarifiers
300mm planers | 6pt TCT carbide flails
8pt TCT carbide flails
6 teeth milling cutters | 108pcs TCT/set
120pcs TCT/set
160pcs TCT/set About 40pcs Milling/set |
14" scarifiers
350mm planers | 8pt TCT carbide flails
12pt TCT carbide flails
6 teeth milling cutters | 100~230pcs TCT /set About 40pcs Milling/set | Edco® - CPU-12 Sase® - SC12E Von Arx® - VA30 Trelawny-SCARIFIER TFP 320 Edco® - CPU-10FC Airtec® - RT 3200 Airtec® - RM 320 Blastrac - BMP-335 SCARIFIER |
Various tool replacement optional:
Scarifier Milling Cutters are utilized for removing thick and soft
materials such as mastic, thermoplastic, waterproofing mem-branes, cold plastic coatings, glues and the like. It leaves the
surface smooth and ready for preparation, and is often used to
remove the bulk of material prior to using a carbide-tipped cutter.
Utilize the Milling Cutter for traffic line removal, epoxy removal,
thermoplastic removal, waterproofing membrane removal, cold plastic coatings
removal and general scarification. Long lasting, removes all types
of materials and leaves a smooth finish. Fits all machines
complete drum loaded with hmt-5.40 carbide 5-pin cutter
• designed for thin and hard material removal
• applications include: Roughening, abrading, leveling, grooving,
bulk concrete removal, high spot removal, curled joints, thick
coating and over-layment removal
complete drum loaded with tmo-7.15 solid carbide milling cutter
• designed for the removal of thick and soft thermoplastics, line
stripes, traffic markings on concrete and asphalt
complete drum loaded with tsr-5.5 star wheel/solid carbide
• designed for the removal of thin and hard materials
• applications include: Removal of paint, coatings, adhesive
removal, plastic coatings, and dirt; light concrete preparation
• these star wheel cutters leave a "Shot blasted like" Profile.
Where to use
General cleaning of concrete and asphalt surfaces.*
Traffic line removal.
Paint and light coatings removal.
Adhesives removal.
Stripping of compacted dirt, grease and oil deposits.
De-rusting, de-scaling on ship decks.
Why choose us
Inexpensive.
Versatile; do most jobs.
Leave an extremely smooth surface.
Last longer, save downtime vs. other steel cutters.
Especially effective on layered dirt and grease.
Available in blunt or sharp tooth configurations.
Fit all machines.
Support:
If you are a construction contractors or tool rental company, we
will be able to provide all kinds of tools replacement for your
concrete milling scarifiers, floor grinding machines or floor
planers for you. For any technical data or help, pls contact us at
email: carly@zzxinhe.com right now and we will reply within 24
hours.
